安康附近有没有服务

Welcome to the website of Shandong HuaSu Engineering Materials Co., Ltd
National Service Hotline: 136-2538-6665
 Geogrid manufacturer
contact information

contacts: Manager Liu

mobile phone: thirteen billion six hundred and twenty-five million three hundred and eighty-six thousand six hundred and sixty-five

Email: huasujituan@163.com

  • Steel plastic geogrid with convex nodes
     Steel plastic geogrid with convex nodes

    The steel plastic geogrid with high strength convex node is composed of cast-in-place convex node connecting longitudinal and transverse reinforcing strips. Its joint strength is high, the shear strength of welded grid joint is ≥ 1.5MPa, and the limit peeling force of convex node grid joint is ≥ 300N. The yield elongation is less than 3%, and the yield elongation of convex node plastic geogrid is less than 10%. The laying and positioning of the grid is extremely simple and easy to level. It has the advantages of less penetration, shorter construction period and shorter construction period.

  • steel-plastic composite geogrid
     steel-plastic composite geogrid

    The steel plastic geogrid is composed of steel plastic reinforced belt by a new technology. Because the surface of the product is rolled into regular coarse pattern code and laid in the replacement fill layer, it bears huge stress resistance and friction force between the filling soil. As a whole, the shear, lateral extrusion and uplift of the foundation soil are limited. Due to the large stiffness of the reinforced soil cushion, it is conducive to the diffusion of the upper foundation load And it is transmitted more evenly.

  • Steel plastic grid with convex node
     Steel plastic grid with convex node

    The characteristics of convex node steel plastic composite geogrid 1. Large tensile force: the longitudinal and transverse tensile yield strength per linear meter can reach 20-150kn, which has been tested by the finished product quality supervision and inspection center of Ministry of communications, railway and water conservancy. 2. Small deformation: yield extension of steel plastic geogrid with convex joints

  • Characteristics of steel plastic geogrid
     Characteristics of steel plastic geogrid

    The steel plastic geogrid has the advantages of high strength, small creep and adaptability to all kinds of environmental soil. It can fully meet the needs of high-grade highway retaining wall. It can effectively improve the interlocking and occluding effect of the reinforced bearing surface, greatly enhance the bearing capacity of the foundation, effectively restrain the lateral displacement of the soil, enhance the stability of the foundation, more suitable for deep-sea operation and embankment reinforcement, and fundamentally solve the technical problems of low strength, poor corrosion resistance and short service life caused by long-term seawater erosion of other materials

  • A simple method to identify FRP gratings
     A simple method to identify FRP gratings

    Steel plastic geogrid has the advantages of high strength, small deformation, small creep, corrosion resistance, long service life, and long corrosion resistance in soil and water with different pH values. The steel plastic geogrid takes plastic material as protective layer, supplemented with various additives, so that it has anti-aging, oxidation resistance, acid, alkali, salt and other harsh environment corrosion. Therefore, the steel plastic geogrid can meet the needs of all kinds of permanent projects for more than 100 years, with excellent performance and good dimensional stability.

  • High strength steel plastic geogrid
     High strength steel plastic geogrid

    The high-strength steel plastic geogrid is composed of cast-in-situ convex node connection of longitudinal and transverse reinforcement strips. Its node strength is high, the shear strength of welded grid joint is ≥ 1.5MPa, and the limit peeling force of convex node grid joint is ≥ 300N. Plastic is not only the material to protect high strength steel wire, but also the stress-bearing material of plastic grid. It has the chemical characteristics of acid, alkali and salt corrosion resistance, and has the performance of anti-aging and anti-oxidation by scientific formula. It is suitable for all kinds of permanent projects, and its service life can reach more than 100 years.

Page: 1 / 2 6 per page total 11 home page Previous next page ?? Last page Go to: