安康附近有没有服务

Welcome to the website of Shandong HuaSu Engineering Materials Co., Ltd
National Service Hotline: 136-2538-6665
 Geogrid manufacturer

Steel plastic geogrid with convex nodes

Author: Hengke Shandong HuaSu Engineering Co., Ltd Time: June 12, 2019 05:28 Visits: second
Description: the steel plastic geogrid with high strength convex node is composed of cast-in-situ convex node connecting longitudinal and transverse reinforcing strips. Its node strength is high, the shear strength of welded grid joint is ≥ 1.5MPa, and the limit peeling force of convex node grid joint is ≥ 300N. The yield elongation is less than 3%, and the yield elongation of convex node plastic geogrid is less than 10%. The laying and positioning of the grid is extremely simple and easy to level. It has the advantages of less penetration, shorter construction period and shorter construction period.
 High strength steel plastic geogrid

Steel plastic geogrid with convex nodes

Steel plastic geogrid, convex node steel plastic geogrid. Geogrid plastic lock lock

Large tensile force -- the yield strength of longitudinal and transverse tensile strength per linear meter can reach 20-150kn, which has been tested by the product quality supervision and inspection center of Ministry of communications, railway and water conservancy.

Small deformation: the yield elongation of steel plastic geogrid with convex node is less than 3%, and that of plastic geogrid with convex node is less than 10%.

High node strength - this product adopts the fusion casting convex node type to connect the longitudinal and horizontal ribs to form the grid. Its node strength is high, the shear strength of welded grid node is ≥ 1.5MPa, and the limit peeling force of convex node grid joint is ≥ 300N.

Long life - plastic is the material to protect high-strength steel wire and also the stress-bearing material of plastic grille. It has the chemical characteristics of acid, alkali and salt corrosion resistance, and has anti-aging and anti-oxidation properties after scientific formulation. It is suitable for all kinds of permanent projects, and its service life can reach more than 100 years.

Good effect: the grid net casting convex node structure can enhance the interlocking and occluding effect between the grid and the rock and soil, restrain the lateral displacement of the soil, enhance the bearing capacity of the foundation, reduce the overall settlement of the soil and improve the uneven settlement of the soil, enhance the overall performance of the foundation, and prevent the surface layer from cracking.

Cost saving - it has been proved by some engineering examples that the cost of reinforced earth engineering constructed with this material can be reduced by 10% - 50% compared with the similar projects constructed by traditional methods.

Convenient construction: the laying and positioning of the grid is extremely simple and easy to level. It has a width of 2m-4m, few joints, and can be connected through lock, so the construction period is short

Test index of bidirectional steel plastic geogrid with convex nodes

 Performance index of steel plastic geogrid

 Construction site of steel plastic geogrid